Charmilles Robofil 440 CC electric discharge machine
≈ US$30,070
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kunde
Germany, Menslage
4,000 kg
Germany, Crailsheim
Germany, Überherrn
Germany, Oldenburg
Germany, Saarlouis
Germany, Nordhorn
11,540 kg
Germany, Trier
Germany, Eschenburg
13,580 kg
Germany, Burghaun/Gruben
Germany, 17094 Pragsdorf
Germany, Kunde
Germany, Oldenburg
Germany, Hamburg
Germany, Calbe
Germany, Hadamar
Germany, De-54636 Rittersdorf
Germany, De-54636 Rittersdorf
Germany, De-29562 Suhlendorf
Germany, Lemgo
Machine Benefits
Technical Machine Benefits
Total dielectric volume: 1200 l
Min. /max. Dielectric thickness: 0/435 mm
Standard wire guides: 0. 25 mm
Three-phase input voltage: 400 v
Mains frequency (2 versions): 50 or 60 hz
Power factor: 0. 8
Total installed power: 10 kva
Permissible fluctuations: ±10%
Permissible micro-interruptions: 4 ms
Compressed air supply: 6-7 bar
Extra Information
Controller
Numerical control TFT 12"/
Dimensions of the entire system (WxDxH) mm 2600x2810x2240/
Total weight of the system without dielectric kg 3300/
Total weight of the system with dielectric kg 4450/
Working area/
Max. workpiece dimensions mm 1200x700x400
Max. workpiece weight kg 1500/
Min./max. Dielectric thickness mm 0/200/
Compressed air supply/
Pressure bar 6…7 bar/
Minimum flow rate l/min 150/
Axes/
Travel X, Y, Z mm 550x350x400/
Travel U, V mm 550/350/
Taper angle / height °/mm ±30/400/
Measurement resolution X, Y, U, V, Z µm 0.05/
Movement speed of the axes mm/min 0…3000/
Collision protection for the axes X, Y, U, V, Z/
Dielectric/
Type Deionized water/
Total dielectric volume L 1200/
Filter cartridges 4/
Deionization bottles 1/
Total deionization resin volume L 20/
Electrode / Wire/
Standard wire guides mm Φ 0.25/
Programmable wire tensile force daN 0.3…2.5/
Programmable wire unwinding speed m/min 0.5…15/
Automatic wire threading mm Φ 0.1/0.2/0.25/0.3/
Automatic wire rethreading mm Φ 0.2/0.25/0.3/
Minimum pilot hole diameter for automatic threading/
mm Φ 0.8/
Maximum height for automatic threading with 0.25 mm wire/mm 220/
Permissible wire spool weights and types kg according to DIN standards: 1.6 (K100) – 8(K160)/
according to JIS standards: 3(P3) – 5(P5)/
Electrical cabinet/
Three-phase input voltage V 400/
Mains frequency (2 versions) Hz 50 or 60/
Permissible fluctuations ±10%/
Total installed power: 10 kVA/
Permissible micro-interruptions in ms: 13.5 A/
Power factor: 0.8/
Display: 12" TFT/
Available standard languages: French, English, German,Italian, Spanish/
User memory capacity: 6 GB/
Operating system: Windows XP SP2/
CD-ROM/
Ethernet port, USB/
Parallel port/
Remote control/
Alphanumeric keyboard: PC/
Permissible ambient conditions/
Temperature for optimal accuracy: 20±1°C/
Temperature for optimal equipment: 15…30°C/
Permissible relative humidity: 40…80%/
Max. noise emission of the machine: 76 dB(A)/
Thermal stabilization time: 3 h/
Electrical equipment protection rating: IP 43
application type: EDM
Location: Germany
machine type: Wire EDM Machine
Machine Depth: 2600 mm
Number of Axes: 3