AXA VHC 3-3000 S machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Additional equipment
Machines comes with C-axis and a +/-100º b-axis head.
Machine Benefits
Qualitative Machine Benefits
T-slot spacing: 160 mm
3d probe: rmp 60 renishaw
Tool probe: tt140 heidenhain
Nc swivel head, infinitely adjustable, swivel range ± 100°
Swivel range b-axis: ± 90°
Locking: 2. 5° (1°, stepless)
Min. Tool change time: 5 sec.
Positioning accuracy over 1000 mm: ± 0. 015 (0. 0075) mm
Repeatability: ± 0. 005 mm
Milling in st 60 max. : 800 cm³/min
Technical Machine Benefits
Max. Torque at 40%: 143 (-255) nm
Max. Power at 40%: 30 (40) kw
Coolant supply through spindle: 40 bar
Max. Feed force: 9000 n
X-axis travel: 1760 - 9000 mm
Pendulum travel: approx. X-travel/2 - 500 mm
Y-axis travel (horizontal/vertical): 700 (900) mm
Z-axis travel (horizontal/vertical): 850 (950) mm
Distance table to spindle nose (horizontal/vertical): 250 - 1100 mm / 40 - 890 mm
T-slots, center slot as alignment slot h7: 14 h9 mm
Extra Information
Machine still under power /
Drilling in St 60 max.: Ø 35 mm/
Thread cutting in St 60 max.: M 30/
Additional weight per meter of X-travel: approx. 2500 kg/
Weight of base machine (X = 1760): approx. 14500 kg/
Working height: min. 40 mm max. 890 mm (vertical)/
min. 250 mm max. 1100 mm (horizontal)/
Drive Power: The AC hollow shaft motor provides a power of 30 kW/143 Nm at 40% ED./
Spindle Speed: The spindle has a speed range of 30−6,000 U/min./
Tool Changer: It has a chain magazine with 22 tool slots (SK40 DIN69871A/69872 A)./
Dimensions:
Weight: approximately 16,500 kg./
Dimensions (L×B×H): approximately 5.7 m×3.9 m×3.4 m (+1.7 m for the chip conveyor)./
Workspace Encapsulation: A bellows cover with sheet metal lamellae is used for encapsulation./
Extension of the Y-axis stroke to 900 mm and Z-axis stroke to 950 mm/
Shuttle operation with a shuttle plate made of aluminum, including a viewing window and safety switch./
Expansion of the tool magazine to 36 tool slots/
Hydraulic clamping for the SK 40 tool holder/
1-axis NC swiveling head that is continuously positionable with a range of ±100∘/
and programmable in steps of 0.001∘/
Increased drive power with an AC hollow shaft motor (No. 111). The maximum power is 27 kW/100% ED or 40 kW/40% ED. The maximum torque is 127 Nm/100% ED or 191 Nm/40% ED./
Increased spindle speeds with a range of 30−12,000 U/min with oil-spray-mist lubrication/
Coolant supply through the spindle, including an external 400-liter tank with a paper band filter system and a high-pressure pump. It can provide up to 40 bar of pressure. This option requires the chip conveyor option/
A hinged belt chip conveyor (left or right) with an integrated 200-liter coolant tank and a pump for external cooling/
A 5th axis NC rotary table RTA 4L-800 with a faceplate diameter of 1000 mm. The table is designed for a horizontal setup with hydraulic clamping/
The RTA is integrated to be level with the rigid table/
A Heidenhain iTNC 530 control system, combined with digital drive control and a 15" TFT display/
A 3D touch probe (Renishaw RMP 60) for tool measurement, which is stored in the tool magazine and can be automatically changed. The probe software is used for zero point and position determination, centering, and electrical workpiece alignment/
A tool touch probe system (Heidenhain TT 130) for measuring tool lengths and radii, which can be mounted in the machining area and measures with either a standing or rotating tool
Optional: 6.axis. Fully integrated rotary table
application type: Milling
Location: Germany
machine type: Universal Machining Centre
control unit brand: HEIDENHAIN
Control Brand: HEIDENHAIN
Control Model: iTNC 530
Table Load: 1200 kg
C-axis: 100°
Number of Axes: 5
Number of Tools: 36