Verdés 128+ roll crusher
≈ HK$571,400
Ramalhal7374 km to "United States"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+351 966 99...
Show
+351 966 999 459
+34 619 02 ...
Show
+34 619 02 07 05
Portugal 
Length: 6.00
Height: 3.00
Obs: Mat width 1.30m
state: For Sale
Equipment suitable for secondary and possibly primary crushing of dry and semi-wet materials up to a hardness of 4 Mohs.
The crushing is carried out through the action of two counter-rotating rollers of different sizes, one of them equipped with blades.
This machine was designed to homogenize dry or semi-humid clays, admitting an inlet between 15 and 20 cm, which transforms it into an outlet between 20 and 5 mm. To carry out this work, the machine is composed of two cylinders that rotate in opposite directions. One is large diameter and smooth with slow turning speed, and the other smaller diameter is fitted with blades and has fast turning speed.
The slow cylinder is mounted on retractable bearing holders, that is, it can move backwards when the tension between the two cylinders is exceeded. This tension is maintained by springs that press each of the bearing supports of said cylinder. So that the smooth cylinder is always in good condition, the machine is equipped with scrapers that keep it clean, which are tensioned by a pneumatic group, adjusted to a pressure of 4 Kg/cm2.
Technical Data:
Diameter and length of quick cylinder: 660X1200mm
Slow cylinder diameter and length: 1000X1200mm
Fast cylinder power: 75/1800 rpm
Slow cylinder power (with geared motor): 30 rpm
Fast cylinder speed: 500 rpm
Slow cylinder speed: 115 rpm
Production: 100/160m3/h
Approximate weight: 11 tons
Sold with electric motors, chassis, electrical panels, operation manual.
In very good working order. It's in our warehouse.
Comprimento: 6.00
Altura: 3.00
Obs: Largura do tapete 1,30m
Estado: Para Venda
Equipamento apropriado para britagem secundária e possivelmente primária de materiais secos e semi-húmidos até uma dureza de 4 Mohs.
O esmagamento é realizado através da ação de dois rolos contra rotativos de tamanhos diferentes, um deles equipado com lâminas.
Esta máquina foi concebida para homogeneizar argilas secas ou semi-húmidas, admitindo uma entrada entre 15 e 20 cm, que a transforma numa saída entre 20 e 5 mm. Para realizar este trabalho, a máquina é composta por dois cilindros que giram em sentidos opostos. Um é de diâmetro maior e liso, com velocidade de giro lenta, e o outro de diâmetro menor é provido de lâminas e tem velocidade de giro rápida.
O cilindro lento é montado em porta-mancais retráteis, ou seja, pode retroceder quando a tensão entre os dois cilindros for ultrapassada. Esta tensão é mantida por molas que pressionam cada um dos suportes de rolamento do referido cilindro. Para que o cilindro liso esteja sempre em boas condições, a máquina é equipada com raspadores que o mantêm limpo, que são tensionados por um grupo pneumático, ajustado a uma pressão de 4 Kg/cm2.
Dados técnicos:
Diâmetro e comprimento do cilindro rápido: 660X1200mm
Diâmetro e comprimento do cilindro lento: 1000X1200mm
Potência rápida do cilindro: 75/1800 rpm
Potência do cilindro lento (com motorredutor): 30 rpm
Velocidade rápida do cilindro: 500 rpm
Velocidade lenta do cilindro: 115 rpm
Produção: 100/160m3/h
Peso aproximado: 11 toneladas
Vendido com motores elétricos, chassis, painéis elétricos, manual de operação.
Em muito bom estado de funcionamento. Está no nosso armazém.