Atlas Copco GA11VSD+ stationary compressor
≈ HK$68,210
Grenzach-Wyhlen6908 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7624 98...
Show
+49 7624 9889756
+49 170 81...
Show
+49 170 8106758
Germany 
Germany, Location:bonn
Germany, Bielefeld
Germany, Egenhofen
Germany, Location:frankfurt
50 Hz
Germany, Gifhorn
Germany, Ahaus
Germany, Frankenthal/Pfalz
Germany, Frankenthal/Pfalz
Germany, Ahaus
Lithuania, Kužiai
Germany, Dabergotz
Germany, Ahaus
Germany, Aachen
Poland, Belchatów
Germany, Egenhofen
Germany, Frankenthal/Pfalz
Germany, Salzgitter-Bad
Germany, Ahaus
tension: 230 V
power: 0,385 kW
Type: ÖWAMAT KT 03
Serial number: ITJ690346
power: 0,385 kW
tension: 230 V
Max. pressure: 16 bar
Manufacturer: BEKO Condensate Technology GmbH
Origin: Italy
Manufacturer: BEKO Condensate Technology GmbH
Type: ÖWAMAT KT 03
Serial number: 3/8350
* Weight compressor: 191 kg
model/type: GA11VSD+
Serial number: 3/8350
flow: 32.5 l/s (1.9 m³/min)
Pressure max.: 13 bar
frequency: 50 Hz
number of revolutions: 7,700 rpm
mass: 191 kg
Mission: Oil-water separation for compressed air condensate
Replacement filter: AF 03-1
The system consists of the parts shown in the pictures.
This modern compressed air system from Atlas Copco offers an energy-efficient complete solution for industrial applications. The frequency-controlled screw compressor GA11VSD+ (11 kW) delivers constantly regulated compressed air, the integrated FX30 refrigeration dryer ensures dry and clean compressed air, and the BEKO ÖWAMAT KT 03 System separates oil and water from the condensate in an environmentally friendly manner.
The machine has been regularly serviced (last service at 3,888 hours in December 2024, next service at 8,000 hours) and is in very good used condition (year of manufacture 2023).
---------------------------------------------------------------
2. General functions
- Atlas Copco GA11VSD+ screw compressor with variable speed control (VSD) for high energy savings
- Perfomance: 11 kW / 15 HP
- volume flow: 32.5 l/s (68.9 cfm) at 13 bar
- Tension: 400 V, 50 Hz, 3 phases
- Low noise level through encapsulated design
- Atlas Copco FX30 refrigeration dryer, max. pressure: 16 bar, refrigerant: R513A
- BEKO ÖWAMAT KT 03 Oil-water separation system for clean condensate drainage
- Year of manufacture of all components: 2023
- Compressor weight: 191 kg
---------------------------------------------------------------
3. CO₂ savings
By purchasing this used, energy-efficient compressor system instead of a new one, a CO₂ saving of 2,000 – 2,500 kg CO₂ achieved.
This corresponds roughly to the CO₂ emissions of a mid-size car with a mileage of over 10,000 km.
---------------------------------------------------------------
4. Device details (type plate data in German)
Compressor:
Manufacturer: Atlas Copco Airpower n.v.
Model/Type: GA11VSD+
Serial number: API054865
Year of manufacture: 2023
Perfomance: 11 kW (15 hp)
volume flow: 32.5 l/s (1.9 m³/min)
Max. pressure: 13 bar
Tension: 400 V
Frequency: 50 Hz
speed: 7,700 rpm
Weight: 191 kg
Origin: Belgium
---------------------------------------------------------------
Refrigeration dryer:
Manufacturer: Atlas Copco Airpower N.V.
Type: FX 30 (E4)
Serial number: ITJ690346
Perfomance: 0.385 kW
Tension: 230 V
refrigerant: R513A
Max. pressure: 16 bar
Year of manufacture: 2023
Origin: Italy
---------------------------------------------------------------
Condensate separator:
Manufacturer: BEKO Condensate Technology GmbH
Type: ÖWAMAT KT 03
Serial number: 3/8350
Mission: Oil-water separation for compressed air condensate
Replacement filter: AF 03-1
Condition: used, with signs of wear
* Gewicht Kompressor: 191 kg
Modell/Typ: GA11VSD+
Seriennummer: API054865
Leistung: 11 kW (15 PS)
Volumenstrom: 32,5 l/s (1,9 m³/min)
Druck max.: 13 bar
Spannung: 400 V
Frequenz: 50 Hz
Drehzahl: 7.700 U/min
Gewicht: 191 kg
Typ: FX 30 (E4)
Seriennummer: ITJ690346
Leistung: 0,385 kW
Spannung: 230 V
Kältemittel: R513A
Max. Druck: 16 bar
Herkunft: Italien
Hersteller: BEKO Kondensattechnik GmbH
Typ: ÖWAMAT KT 03
Seriennummer: 3/8350
Einsatz: Öl-Wasser-Trennung für Druckluftkondensat
Austauschfilter: AF 03-1
Die Anlage besteht aus den Teilen, die in den Bildern zu sehen sind.
Dieses moderne Druckluftsystem von Atlas Copco bietet eine energieeffiziente Komplettlösung für industrielle Anwendungen. Der frequenzgeregelte Schraubenkompressor GA11VSD+ (11 kW) liefert konstant geregelte Druckluft, der integrierte FX30 Kältetrockner sorgt für trockene und saubere Druckluft und das BEKO ÖWAMAT KT 03 System trennt umweltgerecht Öl und Wasser aus dem Kondensat.
Die Maschine wurde regelmäßig gewartet (letzte Wartung bei 3.888 Bh in 12/2024, nächste Wartung bei 8.000 Bh) und befindet sich in einem sehr guten gebrauchten Zustand (Baujahr 2023).
---------------------------------------------------------------
2. Allgemeine Funktionen
- Atlas Copco GA11VSD+ Schraubenkompressor mit variabler Drehzahlregelung (VSD) für hohe Energieeinsparung
- Leistung: 11 kW / 15 HP
- Volumenstrom: 32,5 l/s (68,9 cfm) bei 13 bar
- Spannung: 400 V, 50 Hz, 3 Phasen
- Geringer Geräuschpegel durch gekapselte Bauweise
- Atlas Copco FX30 Kältetrockner, max. Druck: 16 bar, Kältemittel: R513A
- BEKO ÖWAMAT KT 03 Öl-Wasser-Trennsystem für saubere Ableitung von Kondensat
- Baujahr aller Komponenten: 2023
- Gewicht Kompressor: 191 kg
---------------------------------------------------------------
3. CO₂-Einsparung
Durch den Kauf dieses gebrauchten, energieeffizienten Kompressorsystems anstelle eines Neugeräts wird eine CO₂-Einsparung von geschätzt 2.000 – 2.500 kg CO₂ erzielt.
Dies entspricht etwa dem CO₂-Ausstoß eines Mittelklassewagens bei einer Fahrleistung von über 10.000 km.
---------------------------------------------------------------
4. Gerätedetails (Typenschilddaten auf Deutsch)
Kompressor:
Hersteller: Atlas Copco Airpower n.v.
Modell/Typ: GA11VSD+
Seriennummer: API054865
Baujahr: 2023
Leistung: 11 kW (15 PS)
Volumenstrom: 32,5 l/s (1,9 m³/min)
Druck max.: 13 bar
Spannung: 400 V
Frequenz: 50 Hz
Drehzahl: 7.700 U/min
Gewicht: 191 kg
Herkunft: Belgien
---------------------------------------------------------------
Kältetrockner:
Hersteller: Atlas Copco Airpower N.V.
Typ: FX 30 (E4)
Seriennummer: ITJ690346
Leistung: 0,385 kW
Spannung: 230 V
Kältemittel: R513A
Max. Druck: 16 bar
Baujahr: 2023
Herkunft: Italien
---------------------------------------------------------------
Kondensattrenner:
Hersteller: BEKO Kondensattechnik GmbH
Typ: ÖWAMAT KT 03
Seriennummer: 3/8350
Einsatz: Öl-Wasser-Trennung für Druckluftkondensat
Austauschfilter: AF 03-1
Zustand: gebraucht, mit Gebrauchsspuren